Straw Color Wave Tiles Making Machine , Reverse In Phase Running Tech Roof Tiles Machine
automatic Mgo roof tile Machine,Roof Tile Making Machine,root tile equipment
1. Introduction for roof tile machine:
Straw color wave roof tile forming machine can produce pantile with all kinds of
waves and heat-preserving layer, which will be used at the roof as the substitute
of traditional asbestos tile, color steel tile and cement tile. There is asbestos in the
asbestos tile which include carcinogen.
Product features
The product manufactured by this equipment has following features: fireproof,
waterproof, environmental protection and no toxicity, at the same time it is
resistant against acid, alkali and aging. This product can be nailed, planed, sawed
and sticked. In view of that its fireproofing grade is A, so our product will not be
combustible when the fire is 800-1000°C.At the same time, when our product is
fell into the water for a week, there are not the following phenomenon such as
chalking, deformation and warp. In light of there is not glue in the raw materials,
so there is not formaldehyde and benzene for our boards.Rich color and never
fading
Technology features
This machine adopts reverse in-phase running technology.
There is not any requirement about high temperature and high pressure during
production processing. The board will be
formed at one time after rollerextruding under the conditions of normal
temperature and normal pressure. This is a green environmentalprotection project,
because that there is no waste water, waste materials and waste gas during its
production processing. The finished board don’t need high temperature drying,
airdrying and watering, and under the normal temperature, they will dry well
indoor.
Equipment Model and Product Specification
According to different production, our equipment has 6 models for large-scale, middle-scale and
smallscale. Our all equipment can produce board with same quality and specification
but different production.Customers can adjust the specification of the pantile
according to different requirements, the standard specification is 1.8mX0.72m,
the biggest length is 6 m, the thickness is 3mm~6mm generally. In addition, this
equipment can produce the pantile with
heat-preserving layer.
Product Tags:
|
|
Straw Color Wave Tiles Making Machine , Reverse In Phase Running Tech Roof Tiles Machine Images
|
